Keysight Technologies N5990A User Manual page 208

5 HS Tests
Parameter Name
Result
Jitter Frequency
Max Passed SJ
Max Generator Capability
Min User-Defined SJ
Max Passed DJ
Max Passed TJ
208
Figure 126 Example HTML Viewer for Jitter Sensitivity Test
Table 34 Jitter Sensitivity Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the result is below the specification limits.
This is the SJ frequency value to be tested.
It is the maximum value of SJ amplitude at which the DUT works successfully.
It is the maximum jitter amplitude value that can be added to the signal with the used hardware
configuration.
It is the minimum SJ amplitude value and the test should be passed till this SJ value is reached.
It is the maximum value of DJ that passed the test.
It is the maximum value of TJ that passed the test.
Keysight N5990A MIPI M-PHY Receiver Test User Guide