Results - Keysight Technologies N5990A User Manual

5 HS Tests

Results

Parameter Name
Result
Tested HS_fOffset_Continuous[ ]
Min Passed
Min Tested
Max Passed
194
An example of a HTML Viewer for the Test 2.1.8b-HS-RX Frequency Offset
Tolerance during HS Continuous-Mode Test procedure is shown in
Figure 119. The results comprise of the following:
• The common parameter list (in Expert Mode).
• A test data table (Refer to
Figure 119 Example HTML Viewer for Test 2.1.8b-HS-RX Frequency Offset Tolerance
HS Cont Mode Test
Table 29 Test 2.1.8b-HS-RX Frequency Offset Tolerance During HS-Continuous Mode Test
data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the DUT does not support the tested prepare length.
It is the tested frequency offset for the step.
It is the minimum frequency offset value that is supported by the DUT.
It is the minimum value of frequency offset that is tested.
It is the maximum value of frequency offset that is supported by the DUT.
Table 30).
Keysight N5990A MIPI M-PHY Receiver Test User Guide