Keysight Technologies N5990A User Manual page 297

Parameter Name
Result
Jitter Frequency
Max Passed Interference
Min User-Defined Interference
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table 55 Common-Mode Interference Test data table
Parameter Description
"Pass" / "Fail" - If the value is "Fail", the squelch exit pulse width is below the limits.
It is the jitter frequency value to be tested.
It is the maximum value of common-mode interference, where the DUT works without errors.
It is the minimum common-mode interference allowed to pass the test.
Interference Tests 9
297