7
PWM Tests
Dependencies
Results
266
These parameters are listed in alphabetical order in
The calibrations required for this test are as follows:
•
Reference Clock Calibration
•
Level Calibration Terminated / Into Open
An example of a HTML Viewer for the Test 2.2.8-PWM-RX Receive Ratio
PWM-G1 and Above (k
results comprise of the following:
•
The common parameter list (in Expert Mode)
•
A test data table (Refer to
) Test procedure is shown in
PWM-RX
Table
48)
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table
6.
Figure
156. The