Keysight Technologies N5990A User Manual page 155

Parameter Name
Result
Amplitude
Offset
Min Passed Amplitude
Min Spec Amplitude
Max Passed Amplitude
Max Spec Amplitude
Error Count
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table 20 Test 2.1.1-HS-RX Differential Input Voltage Amplitude Test data table
Parameter Description
"Pass"/"Fail" - If the amplitude tolerance is less than the spec limit, the value is "Fail".
It is the value of the differential voltage amplitude to be tested.
It is the value of the common mode voltage to be tested.
It is the minimum differential voltage amplitude value, where the DUT has no errors.
It is the minimum differential voltage amplitude value where the DUT must work according to the
specification.
It is the maximum differential voltage amplitude value, where the DUT has no errors.
It is the maximum differential voltage amplitude value, where the DUT must work according to the
specification.
It is the number of errors observed by the DUT.
HS Tests 5
155