Keysight Technologies N5990A User Manual page 221

Parameter Name
Result
Squelch Exit Voltage
Min Spec
Max Spec
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 134 Example HTML Viewer for Test 2.4.3-SQ-RX Squelch Exit Voltage Test
Table 36 Test 2.4.3-SQ-RX Squelch Exit Voltage Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the squelch exit voltage is outside the spec limits.
It is the amplitude value that causes the hibernate state exit.
It is the minimum amplitude value where the DUT should exit from the hibernate state.
It is the maximum value of the amplitude, where the DUT must exit from the hibernate state.
Squelch Tests 6
221