Keysight Technologies N5990A User Manual page 191

Parameter Name
Result
Tested HS_fOffset_Burst[]
Min Passed
Min Tested
Max Passed
Max Tested
Tested Amplitude
Tested Offset
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 117 Example HTML Viewer for Test 2.1.8-HS-RX Frequency Offset Tolerance
during HS-Burst Test
Table 28 Test 2.1.8-HS-RX Frequency Offset Tolerance during HS-Burst Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the DUT does not support the tested prepare length.
It is the tested frequency offset for the step.
It is the minimum frequency offset value that is supported by the DUT.
It is the minimum value of frequency offset that is tested.
It is the maximum value of frequency offset that is supported by the DUT.
It is the maximum value of frequency offset value that is tested.
It is the differential voltage amplitude value that is tested.
It is the offsetcommon mode voltage value that is tested.
HS Tests 5
191