N5990A M-Phy Station Configuration; Test Station Selection - Keysight Technologies N5990A User Manual

2 N5990A M-PHY Station

N5990A M-PHY Station Configuration

Test Station Selection

26
Refer to the "N5990A Test Automation Software Platform Installation
Guide" for instructions on how to install and start the N5990A Test
Automation software platform. After the software has been installed, two
icons are added to the desktop as shown in
for the Station Configuration and the other for the M-PHY application.
You need to start the N5990A Station Configuration prior to the M-PHY
application. You can select the application (that is, M-PHY, PCI Express 3,
HDMI ...) and the set of instruments used for it. To start the software,
double-click the left mouse button on the MPHY Station Configuration
icon (see Figure 5), or alternatively go to Start > All Programs > BitifEye >
MPHY > ValiFrame M-PHY Station Configuration.
Figure 5 Keysight M-PHY Station Configuration Icon
The Station Selection window appears with the M-Phy Station selected
by default (see Figure 6).
Figure 5
Keysight N5990A MIPI M-PHY Receiver Test User Guide
and Figure 9. One is