7
PWM Tests
Dependencies
Results
250
The calibrations required for this test are as follows:
•
Reference Clock Calibration
•
Level Calibration Terminated / Into Open
An example of a HTML Viewer for the Test 2.2.5-PWM-RX Differential
Termination Disable Time (T
Figure
148. The results comprise of the following:
•
The common parameter list (in Expert Mode)
•
A test data table (Refer to
Figure 148
Example HTML Viewer for Test 2.2.5-PWM-RX Differential Termination
Enable Time (TTERM-OFF-PWM-RX)
Table 44
Test 2.2.5-PWM-RX Differential Termination Disable Time (T
data table
) procedure is shown in
TERM-OFF-PWM-RX
Table
44)
Keysight N5990A MIPI M-PHY Receiver Test User Guide
) Test
TERM-OFF-PWM-RX