Keysight Technologies N5990A User Manual page 70

3 Calibrations and Test Procedures
70
Figure 35
If the "Use Switch" option is selected in the Station Configuration (see
NOTE
Figure 7
checked, the switch will be included in the setup but not for multi-lane
purposes (in this case is used to switch between generators). Therefore
the connections for more than one lane must to be done as explained in
the MultiChannel without Switch section.
If the "Use Switch" option is selected and the "Separated Low Speed
Generator" not, the switch will be used for multi-lane purposes and the
connections for more than one lane must to be done as explained in the
Multichannel with Switch section.
Connection Diagram for Switch in detail
), but also the "Separate Low Speed Generator" option is
Keysight N5990A MIPI M-PHY Receiver Test User Guide