Connection Setup - Keysight Technologies N5990A User Manual

2 N5990A M-PHY Station

Connection Setup

60
• Insertion Loss 2: Insertion loss applied to the second frequency
point.
• Automatic: The Embedded ISI fixture is calibrated to a target value,
discounting the loss of the cables and of the Switch (if present). Using
the Automatic mode will result in a new calibration, named Embedded
Fixture ISI Calibration.
These properties can be set for each Gear.
Click the Connection Setup button (see
Connection Setup panel (see
Figure 29 Connection Setup panel (for Transmitter Configuration)
It contains the following options:
1 Probing Method: It can be selected as:
• Active Probe (Differential Probe)
• Active Probe (Active Termination Adapter)
• Active Probe (Active Termination Adapter)[Manual]
• Direct Connect
2 Connection Type: It can be selected as:
• Single-Ended
Figure 12) to open the
Figure 29).
Keysight N5990A MIPI M-PHY Receiver Test User Guide