Results - Keysight Technologies N5990A User Manual

Results

Parameter Name
Result
Termination Time Min
Termination UI Min
Min Spec
Keysight N5990A MIPI M-PHY Receiver Test User Guide
An example of a HTML Viewer for the Test 2.3.5-SYS-RX Differential
Termination Disable Time (T
Figure 163. The results comprise of the following:
• The common parameter list (in Expert Mode).
• A test data table (Refer to
Figure 163 Example HTML Viewer for Test 2.3.5-SYS-RX Differential Termination Dis-
able Time (T
TERM-OFF-SYS_RX
Table 52 Test 2.3.5-SYS-RX Differential Termination Disable Time (T
Parameter Description
"Pass"/"Fail"- If the value is "Fail", the termination disable time is not within the spec limit.
It is the shortest/minimum termination disable time in "ns".
It is the shortest/minimum termination disable time in "UI".
It is the minimum value of the termination disable time, where the DUT must work according to the
specification.
) test procedure is shown in
TERM-OFF-SYS-RX
Table 52).
) Test
Sys Burst Tests 8
) data table
TERM-OFF-SYS-RX
283