Parameters
Dependencies
Results
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 40
Connection Diagram for Reference Clock Calibration (for N4903B)
The parameters used in Expert Mode for this calibration, are as follows:
•
Oscilloscope bandwidth
•
Amplitude Range
•
Offset Range
•
Use Infiniisim
•
Transfer Function Chan1
•
Filter Delay Chan1
•
Max. Time Span Chan1
These parameters are listed in
No procedure is required for this calibration.
An example of a HTML Viewer for the Reference Clock Calibration
procedure containing two results is as shown below (see
Figure
42). The results comprise of the following:
•
A calibration data graph.
•
The common parameter list (in Expert Mode).
•
A data table for the offset and amplitude that are being calibrated.
(Refer to
Table 7
for the parameter description).
Table
6.
Calibrations
4
Figure 41
and
85