Keysight Technologies N5990A User Manual page 199

Parameter Name
Result
Tested HS_Prepare[ ]
Min Passed
Min Tested
Max Passed
Max Tested
Tested Amplitude
Tested Offset
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 121 Example HTML Viewer for Test 2.1.9-HS-RX PREPARE Length Verification
Table 31 Test 2.1.9-HS-RX PREPARE Length Verification data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the DUT does not support the tested prepare length.
It is the value of the tested HS-Prepare length.
It is the shortest prepare length value supported by the DUT.
It is the shortest prepare length that is tested.
It is the maximum prepare length value supported by the DUT.
It is the maximum prepare length value that is tested.
It is the differential voltage amplitude value to be tested.
It is the common mode voltage value that is tested.
HS Tests 5
199