Setup Procedure Full; Purpose; Procedure; Connection Diagram - Keysight Technologies N5990A User Manual

10 Manual Test Procedures

Setup Procedure Full

Purpose

Procedure

Connection Diagram

300
This procedure is available for all hardware configurations.
Figure 174 Setup Procedure Full
This procedure allows you to set a wide range of parameters as well as to
measure the BER after the said parameters have been set.
If any procedure is not run previously, this procedure performs a full
initialization of the generator and the DUT. The sequence, levels and all
selected parameters are set, the generator started and the BER
measurement taken.
No special connection diagram is available, but it can be connected in the
same way as for Test 2.1.1- HS-RX Differential Input Voltage Amplitude
Test.
Keysight N5990A MIPI M-PHY Receiver Test User Guide