4
Calibrations
Dependencies
Results
136
These parameters are listed in alphabetical order in
The procedures required for this calibration are as follows:
•
Level Calibrations (Terminated / Into Open).
An example of a HTML Viewer for the Accumulated Voltage Calibration
Terminated / Into Open procedure is shown in Figure 80. The results
comprise of the following:
•
A calibration data graph.
•
The common parameter list (in Expert Mode).
•
A data table for the differential voltage amplitude that is being
calibrated (Refer to
Table
17).
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table
6.