6
Squelch Tests
Test 2.4.3-SQ-RX Squelch Exit Voltage (VSQ)
Purpose
Procedure
216
It is available for all hardware configurations.
Figure 129
Test 2.4.3-SQ-RX Squelch Exit Voltage Test
This test is to verify the minimum and maximum squelch exit voltage (V
levels according to the M-PHY specification.
The data generator sends a test sequence consisting of a single DIFN
pulse among the DIFP states and starts with an amplitude less than the
minimum squelch exit voltage. Then, the voltage amplitude is increased
with a Step Size value until the DUT exits the hibernate state and enters
into the sleep state.
Keysight N5990A MIPI M-PHY Receiver Test User Guide
)
SQ