Keysight Technologies N5990A User Manual page 203

Parameter Name
Result
Tested HS_Sync
Min Passed
Min Tested
Max Passed
Max Tested
Tested Amplitude
Tested Offset
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 123 Example HTML Viewer for Test 2.1.10-HS-RX Sync Length Verification
Table 33 Test 2.1.10-HS-RX Sync Length Verification data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the DUT does not support the tested sync length otherwise "Pass".
It is the tested sync length value.
It is the shortest sync length value supported by the DUT.
It is the shortest sync length that is tested.
It is the maximum sync length value supported by the DUT.
It is the maximum sync length value that is tested.
It is the value of the tested differential voltage amplitude.
It is value of tested common mode voltage.
HS Tests 5
203