Keysight Technologies N5990A User Manual page 133

Parameter Name
Result
SJ Frequency
SJ Amplitude
Eye Width
Voltage Amplitude
Eye Height
Maximum V_diff_ac_tx
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 75 Example HTML Viewer for Eye Opening Height
Table 16 Eye Opening Calibration with Jitter data table
Parameter Description
"Pass"/"Fail" - If the set-up is wrong, the calibration procedure fails due to the non-monotonic values
measured.
It is the set value for sinusoidal jitter frequency at each step.
It is the set value for sinusoidal jitter amplitude.
It is the measured value of eye width according to the set SJ.
It is the set value for voltage amplitude.
It is the measured value of eye height according to the set voltage.
It is the maximum measured value of the differential voltage amplitude.
Calibrations 4
133