Keysight Technologies N5990A User Manual page 269

Keysight N5990A MIPI M-PHY Receiver Test User Guide
8 Sys Burst Tests
Test 2.3.1-SYS-RX Differential Input Voltage Amplitude Test
Test 2.3.3-SYS-RX Common Mode Input Voltage Tolerance Test
Test 2.3.4-SYS-RX Differential Termination Enable Time
(TTERM-ON-SYS-RX)
Test 2.3.5-SYS-RX Differential Termination Disable Time
(TTERM-OFF-SYS-RX)
The MIPI M-PHY Specification document defines the requirements for the
M-PHY devices. Refer to introduction of HS Tests for the parameters,
which are included in the M-PHY specification. The test procedures for the
SYS-RX are divided into two sub groups such as:
/ 278
/ 281
1 Terminated Mode
2 Non-Terminated Mode
/ 270
/ 274