7
PWM Tests
Dependencies
Results
246
•
Prepare Length
•
Sleep Length [UI]
•
Prepare Length Capability
•
IBerReader Init Mode
These parameters are listed in alphabetical order in
The calibrations required for this test are as follows:
•
Reference Clock Calibration
•
Level Calibration Terminated / Into Open
An example of a HTML Viewer for the Test 2.2.4-PWM-RX Differential
Termination Enable Time (T
Figure
146. The results comprise of the following:
•
The common parameter list (in Expert Mode)
•
A test data table (Refer to
Figure 146
Example HTML Viewer for Test 2.2.4-PWM-RX Differential Termination
) procedure is shown in
TERM-ON-PWM-RX
Table
43)
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table
6.