Keysight Technologies N5990A User Manual page 273

Parameter Name
Result
Amplitude
Offset
Min Passed Amplitude
Min Spec Amplitude
Max Passed Amplitude
Max Spec Amplitude
Error Count
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the amplitude tolerance is below the spec limits.
It is the differential voltage amplitude value to be tested.
It is the offset common mode voltage value to be tested.
It is the minimum amplitude value, where the DUT works without errors.
It is the minimum amplitude value, where the DUT must work successfully.
It is the maximum amplitude value, where the DUT works without errors.
It is the maximum amplitude value, where the DUT should work successfully.
The number of errors that occurred during the observation time.
Sys Burst Tests 8
273