Keysight Technologies N5990A User Manual page 128

4 Calibrations
Parameter Name
Result
Jitter Frequency
Set SJ
128
Figure 72 Example HTML Viewer for SJ Calibration
Table 15 SJ Calibration data table
Parameter Description
"Pass"/"Fail" - If the set-up is wrong, the calibration procedure fails due to the non-monotonic values
measured.
It is the value of calibrated jitter frequency.
It is the measured value for the set SJ value and SJ Frequency combination.
Keysight N5990A MIPI M-PHY Receiver Test User Guide