Keysight Technologies N5990A User Manual page 161

Parameter Name
Result
Target Eye Opening
Amplitude
Offset
Min Spec Accumulated Voltage
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 97 Example HTML Viewer for Test 2.1.2-HS-RX Accumulated Differential In-
put Voltage Tolerance Test
Table 21 Test 2.1.2-HS-RX Accumulated Differential Input Voltage Tolerance test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the accumulated voltage tolerance is not with in the spec limits.
It is the value of the tested accumulated differential voltage.
It is the differential voltage amplitude value set to achieve the required target eye opening.
It is the common mode voltage value to be tested.
It is the minimum value of the accumulated differential voltage, where the DUT must work according to
the specification.
HS Tests 5
161