Keysight Technologies N5990A User Manual page 233

Parameter Name
Result
Squelch min exit pulse width
Min Spec
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table 39 Test 2.4.6-SQ-RX Squelch Noise Pulse Distance Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the squelch exit pulse distance is above the spec limits.
It is the pulse distance value that causes the hibernate state exit.
It is the minimum pulse distance value where the DUT should exit from the hibernate state.
Squelch Tests 6
233