Keysight Technologies N5990A User Manual page 73

Parameter Name
Procedure Error Case Behavior
Procedure Failed Case Behavior
Repetitions
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Parameter Description
Proceed With Next Procedure - If an error occurs in the current test or calibration procedure, continue by
running the next procedure in the sequence.
Abort Sequence - Abort the execution of the sequence.
Proceed With Next Procedure - If the current test or calibration procedure fails, continue by running the
next procedure in the sequence.
Abort Sequence - Abort the execution of the sequence.
The number of times the group or procedure is going to be repeated. If the value is '0', it runs only once.
Calibrations and Test Procedures 3
73