Keysight Technologies N5990A User Manual page 39

Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 13 Configure DUT panel (for the database connection)
If you select the Database Offline option in the N5990A M-PHY Station
Configuration window (see
shown in Figure 13. To configure the DUT with a database connection, do
the following:
1 Enter values (any) for Product Number and Serial Number.
2 Click Register Prod uct to register the database connection with the
provided values. Clicking Register Prod uct, enables the OK button.
3 Click OK to configure the DUT with the selected parameters.
The procedures that are run with the database settings are stored at
N5990A Webviewer and these can be viewed by selecting the Product
Number and Serial Number (these values must be the same as the values
provided in Figure 13.
N5990A M-PHY Station
Figure 6), the Configure DUT panel appears as
2
39