Custom Hs Dr - Keysight Technologies N5990A User Manual

Custom HS DR

Keysight N5990A MIPI M-PHY Receiver Test User Guide
Click Custom HS DR in the Configure DUT Panel (see
window is displayed as shown in
be added to the tested data rates list.
Figure 14
Custom Data Rate
Enter the desired value into the Custom Data Rate text box and click Add.
The custom data rate is added to the list of data rates under Added Data
Rates. Click Delete to remove the selected data rate from the list.
The list of procedures that depend on a data rate increases with the
corresponding number of selected custom data rates.
Nominal Data Rate
The selected Ref. Clock Frequency is adjusted to achieve the Custom
Data Rate.
Nominal Ref. Clock
For the selected Ref. Clock Frequency, the Custom Data Rate is
calculated as a multiple of the reference clock.
Ref. Clock Frequency
It can be set to 19.2 MHz, 26MHz, 38.4MHz or 52MHz.
Figure
Custom HS Data Rate panel
N5990A M-PHY Station
Figure 13). A
14. It allows custom data rates to
2
43