Related Manuals for Keysight Technologies PNA-X N524xB
Summary of Contents for Keysight Technologies PNA-X N524xB
- Page 1 Installation Guide Windows 10 Operating System Upgrade Kit To Upgrade PNA-X N524xB, and N5264B, PNA N522xB, and PNA-L N5231/2/4/5/9B Upgrade Kit Model Number: N8985A...
-
Page 2: Safety Notices
DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WARRANTY beyond those set forth in the TERMS IN THE SEPARATE EULA shall apply, except to the © Keysight Technologies, Inc. AGREEMENT WILL CONTROL. extent that those terms, rights, or 2014-2018 licenses are explicitly required... -
Page 3: Description Of The Upgrade
Description of the Upgrade This upgrade kit changes the PNA operating system from Windows 7 (32-bit) to Windows 10 (64-bit). This upgrade can only be installed on the PNA-X N524xB and N5264B, PNA N522xB, and PNA-L N5231/2/4/5/9B. Getting Assistance from Keysight By internet or phone, get assistance with all your test and measurement needs. -
Page 4: Getting Prepared
Getting Prepared Getting Prepared The PNA contains extremely sensitive components that can be ruined if mishandled. Please follow instructions carefully. The person performing the work accepts responsibility for the full cost of the repair or replacement of damaged components. To successfully install this upgrade kit, you will need the following: —... - Page 5 Getting Prepared Protecting Your Workspace from Electrostatic Discharge For information, click on the Chapter 1 bookmark, “Electrostatic Discharge Protection” in the PDF Service Guide ESD Equipment Required for the Installation Description Keysight Part Number ESD grounding wrist strap 9300-1367 5-ft grounding cord for wrist strap 9300-0980 2 x 4 ft conductive table mat and 15-ft grounding wire 9300-0797...
-
Page 6: Items Included In The Upgrade Kit
Items Included in the Upgrade Kit Items Included in the Upgrade Kit Check the contents of your kit against the following list. If any part is missing or damaged, contact Keysight Technologies. Refer to “Getting Assistance from Keysight” on page Table 1... - Page 7 Before You Install This Upgrade Kit Table 2 Files to Copy Before Installing the Windows 10 Drive File Type Location on Both Windows 7 and Notes Windows 10 Drives State Files (.csa, D:\Network Analyzer Copy from Windows 7Windows 7 location to .cst, .sta, .cal) Windows 10 location Result Files (.snp,...
-
Page 8: Upgrade Procedure
Upgrade Procedure Upgrade Procedure The opening of covers or removal of parts may expose dangerous voltages. Disconnect the instrument from all voltage sources while it is being opened. Power off your PNA, and unplug the AC, before replacing any assemblies. The network analyzer must be in proper working condition prior to installing this option. - Page 9 Upgrade Procedure 5. Set aside the old Windows 7 drive (and CPU board assembly, if replaced) in case you later discover you need a file from the old drive. If, after you install the Windows 10 drive, you need to access some files on the old Windows 7 drive, use a USB 2.5-inch hard drive enclosure.
- Page 10 Upgrade Procedure Installation Note N8985-90001...
- Page 11 Installation Note Xxxxx-xxxxx...
- Page 12 This information is subject to change without notice. © Keysight Technologies 2014-2018 Edition 1, October 2018 www.keysight.com...