Keysight Technologies N5990A User Manual page 293

Parameter Name
Result
Interference Frequency
Max Passed
Max Spec
Keysight N5990A MIPI M-PHY Receiver Test User Guide
• The common parameter list (in Expert Mode)
• A test data table (Refer to
Figure 171 Example HTML Viewer for SQ-RX Squelch RF Interference Tolerance Test
Table 54 SQ-RX Squelch RF Interference Tolerance Test data table
Parameter Description
"Pass" / "Fail" - If the value is "Fail", the squelch exit pulse width is below the limits.
It is the interference frequency value to be tested.
It is the maximum value of interference frequency, where the DUT does not exit from squelch.
It is the maximum value of the interference frequency value that the DUT must tolerate.
Table 54)
Interference Tests 9
293