Configuring The Dut - Keysight Technologies N5990A User Manual

Configuring the DUT

Keysight N5990A MIPI M-PHY Receiver Test User Guide
In the Configure DUT panel (see
DUT parameters such as Product Type, Test Type and Protocol, and also
the parameters related to the Receiver/Transmitter test configuration.
The selected parameters are later used in the calibration and test
procedures shown in the N5990A main window.
Figure 11 Configure DUT Panel for Receiver
N5990A M-PHY Station
Figure 11 and Figure 12), you can select
2
37