Keysight Technologies N5990A User Manual page 116

4 Calibrations
Parameter Name
Result
Set Jitter
Measured Jitter
116
Figure 66 Example HTML Viewer for Low Frequency RJ Calibration
Table 12 Low Frequency RJ Calibration data table
Parameter Description
"Pass"/"Fail" - If the set-up is wrong, the calibration procedure fails due to the non-monotonic values
measured.
It is the set value for the low frequency random jitter.
It is the measured value of the random jitter.
Keysight N5990A MIPI M-PHY Receiver Test User Guide