Table of Contents
Advertisement
2
Getting Started
Running the Configuration Wizard
20
If Keysight VISA is used, all the instruments need to be identified using
NOTE
the Keysight Connection Expert, before the Photonic Application Suite
Configuration Wizard is used to configure the Fast Spectral Loss
application to use these instruments. The Connection Expert is part of
the Keysight IO Libraries. Start the Connection Expert and click the
Refresh All button. When all the connected instruments have been
identified, proceed with the steps below.
This procedure is only required if a certain supported instrument is
connected to the PC for the first time.
Once the software is installed and the instruments are connected and
turned on, you can start the Fast Spectral Loss Engine and run the
Configuration Wizard.
On first startup the Configuration Wizard will come up automatically.
Keysight N7700 Photonic Application Suite, Fast Spectral Loss Engine, User's Guide
Advertisement
Table of Contents
