RCal Software – Configuration
RCal Software – Configuration
The RCal controls can be accessed in the X-Series application by selecting Input/Output,
Calibration, Configuration. If this tab is missing, then the instrument is most likely using an older
software revision, missing a license, or is unsupported. (See
"Available RCal Models and Options"
on page
4).
This section provides an overview of how to perform the RCal configuration, calibration, and
application.
RCal calibrations are created and applied within the calibration configuration window.
8
U9361C/F/G/M RCal Receiver Calibrator Measurement Guide