Replacement Of The Film Pocket Sucker Bar Motor M15 - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6

REPLACEMENT OF THE FILM POCKET SUCKER BAR MOTOR M15.

1
. Switch off the ML300.
2
. Take off the PANELS.
3
. Take out the FILM CHUTE.
4
. Cut the WIRE TIE and unplug the FILM POCKET MOTOR.
!
Caution
HOLD THE MOTOR. IT MIGHT FALL DOWN.
5
. Take out the 4 MOUNTING SCREWS.
CHAIN
DOWEL PIN
MOUNTING
SCREW (4)
9/98
GEAR FILM POCKET DRIVE SHAFT
FILM POCKET MOTOR
WIRE TIE
figure 2-29
2-30
REPLACEMENTS
FILM POCKET
DRIVE SHAFT
KODAK AG, Stuttgart