Replacement Of The Cassette Opener Solenoid Y4 - Kodak X-Omat MULTILOADER 300 Plus Service Manual

REPLACEMENTS
FUNCTION TEST.
Warning
BE CAREFUL WHEN WORKING IN THE CASSETTE OPENER AREA. THE OPENER MOTOR
AND THE OPENER MECHANISM ARE VERY STRONG. THEY CANNOT BE MOVED
MANUALLY. THEY MAY SQUEEZE YOUR HAND AND TRAP YOU IF YOU TRY TO STOP
THEM MANUALLY. NEVER START THE CASSETTE OPENER MOTOR WHEN SOMEONE'S
HANDS ARE IN THE CASSETTE AREA.
1
. Take out the MAGAZINES loaded with CUSTOMER FILMS to avoid film fogging.
2
. Run several cycles with test films.
3
. Check that the OPENER BRACKET is vertical when the CASSETTE is open.
4
. Check that the CASSETTE is correctly closed.

REPLACEMENT OF THE CASSETTE OPENER SOLENOID Y4.

1
. Switch off the ML300.
2
. Take off the PANELS.
3
. Unplug the CASSETTE OPENER SOLENOID (Connector X40).
4
. Take out the 2 NUTS from the CASSETTE OPENER SOLENOID.
NUT
KODAK AG, Stuttgart
CONNECTOR X40
figure 2-24
2-23
SM 3058-6
9/98