Kodak X-Omat MULTILOADER 300 Plus Service Manual page 161

ADJUSTMENTS
Note
The FILM should be close to the SENSOR and not close to the MIRROR
7
. Interrupt the infrared beam with a FILM. The voltage should now be > 1.9 V.
8
. If the values are not correct, reposition SENSOR B35 and its MIRROR.
9
. Check this adjustment with all different types of customer films.
10.
If necessary, do the corrections.
11.
Switch off the XML300.
12.
Take out the JUMPER between PIN 1 and PIN 3 at the SOCKET of U41.
13.
Insert U41.
14.
Check for the correct setting of JUMPER A4X34. The JUMPER has to be between
1 and 2.
KODAK AG, Stuttgart
figure 3-81
3-91
SM 3058-6
9/98