Kodak X-Omat MULTILOADER 300 Plus Service Manual page 46

SM 3058-6
Note
The TORSION SPRING is installed correctly if the FILM REJECTER ASSEMBLY rests at the
rear MAGAZINE WALL after the FILM POCKET SUCKER BAR ARM is rotated in the upright
(vertical ) position.
10
. Install the new SPRING.
11.
Do the FILM POCKET ADJUSTMENTS.
FUNCTION TEST.
1
. Check that small and large FILMS are picked up correctly from the magazines.
9/98 2-34
REPLACEMENTS
KODAK AG, Stuttgart