Cassette Area - Kodak X-Omat MULTILOADER 300 Plus Service Manual

PREVENTIVE MAINTENANCE

CASSETTE AREA:

Warning
BE CAREFUL WHEN WORKING IN THE CASSETTE OPENER AREA. THE OPENER MOTOR
AND THE OPENER MECHANISM ARE VERY STRONG. THEY CANNOT BE MOVED
MANUALLY. THEY MAY SQUEEZE YOUR HAND AND TRAP YOU IF YOU TRY TO STOP
THEM MANUALLY. NEVER START THE CASSETTE OPENER MOTOR WHEN SOMEONE'S
HANDS ARE IN THE CASSETTE AREA.
1
. Check the BLOW PIPE position and their function.
2
. Remove any dust and dirt from BASE PLATE under CASSETTE TRANSPORT
ROLLERS.
3
. Check OPENER mechanism. The OPENER must be in the uppermost position. Move
the OPENER up and down. Check if at the end of the movement a high pitch noise
occurs. If so, the adjustment of the CASSETTE OPENER STOP PLATE is not correct.
Do the necessary adjustment.
Start the SERVICE PROGRAM
Select Service Mode ML300 from the GLOBAL MENU ............................ press ENTER
OPENER BRACKET must be vertical
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ................................................................................ press ENTER
Select COMPONENT TEST from the MAIN MENU ....................................... press ENTER
Select CASSETTE MOTORS ............................................................................... press ENTER
Select CASSETTE OPENING M5....................................................................... press ENTER
KODAK AG, Stuttgart
OPENER MECHANISM must stay below the FRAME
OPENER CHAIN
figure 10-2
10-3
SM 3058-6
9/98