Select Film Pick Up Magazine M15; Select Forward - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6
73.
Check that there is a gap of 0 to 1mm between the BLOW PIPES and the
MAGAZINE WALL.
Select MAGAZINE MOTORS ............................................................................ press ENTER
Select STEPPER MOTOR FILM POCKET M10 ................................................. press ENTER
Select MOVE TO LEVELS/HOME POSITION .................................................. press ENTER
Select Move to MAGAZINE 3 ......................................................................... START
Press BACKSPACE twice to come back to screen TEST MAGAZINE MOTORS
Select FILM PICK UP MAGAZINE M15 ........................................................... press ENTER

Select FORWARD

74.
If this distance is not correct, proceed with step 75 else proceed with step 79.
75.
Rotate out the FILM POCKET SUCKER BAR.
Select BACKWARD
Note
The gap has to be correct. The distances given in the MAGAZINE LEVEL ADJUSTMENT are
just a starting point.
76.
Loosen the MOUNTING SCREWS of the MAGAZINE LEVEL BRACKET and move
it up or down as required. Then fasten the MOUNTING SCREWS.
9/98
MAGAZINE WALL
figure 3-53
3-54
ADJUSTMENTS
0-1 mm
KODAK AG, Stuttgart