Select Magazine Motors; Select Stepper Motor Film Pocket M10; Select Move To Levels/Home Position; Select Move To Magazine 3 - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6
48.
Press Backspace until you reach the screen COMPONENT TEST.
49.
Switch off the SOLENOID TILTING MAGAZINE SUCKER BAR Y14 to avoid
overheating and let it cool down if necessary .
Press 3 times BACKSPACE
Select SOLENOIDS ............................................................................................. press ENTER
Select TILTING MAGAZINE SUCKER BAR Y14............................................... press ENTER
Select SOLENOID OFF
Press BACKSPACE twice to go back to the screen COMPONENT TEST
50.
Manually rotate the SUCKER BAR fully out.
51.
To ensure that the FILM POCKET was not moved out of the correct position, do
step 52.
52.
Move the FILM POCKET to MAGAZINE LEVEL 3.
Select MAGAZINE MOTORS ............................................................................ press ENTER
Select STEPPER MOTOR FILM POCKET M10 ................................................. press ENTER
Select MOVE TO LEVELS/HOME POSITION .................................................. press ENTER

Select MOVE TO MAGAZINE 3

53.
Go back to step 38.
54.
Switch off the SOLENOID TILTING MAGAZINE SUCKER BAR Y14 to avoid
overheating and let it cool down if necessary .
Press 3 times BACKSPACE
Select SOLENOIDS ............................................................................................. press ENTER
Select TILTING MAGAZINE SUCKER BAR Y14............................................... press ENTER
Select SOLENOID OFF
55.
Check that the BLOW PIPES are not touching the side of the MAGAZINE
RECESSES. The BLOW PIPES must not be in the shaded area.
9/98
MAGAZINE RECESS
figure 3-47
BLOW PIPE
3-48
ADJUSTMENTS
KODAK AG, Stuttgart