Kodak X-Omat MULTILOADER 300 Plus Service Manual page 111

ADJUSTMENTS
14.
Move the SUCKER BAR ARM by hand using low force. If it can be moved proceed
with step 15 else proceed with step 24.
15.
Start the SENSOR TEST.
Press BACKSPACE twice to go back to the screen COMPONENT TEST
Select SENSORS .................................................................................................. press ENTER
Select SENSOR TEST WITH SOUND.................................................................. press ENTER
16.
Do the adjustment "MAGAZINE SUCKER BAR IN FRONT POSITION" of the FILM
POCKET TIMING DISK starting with step 17.
17.
Make sure that the BALL BEARING is engaged in the DETENT. See figure 3-37.
18.
Loosen the SET SCREW of the LEFT TIMING DISK.
19.
Push the SUCKER BAR ARM forward by hand until there is no clearance.
KODAK AG, Stuttgart
SET SCREW of the left TIMING DISK
figure 3-38
3-41
SM 3058-6
9/98