Cassette Blow Pipe Position - Kodak X-Omat MULTILOADER 300 Plus Service Manual

ADJUSTMENTS

CASSETTE BLOW PIPE POSITION

Purpose:
To ensure that the BLOW PIPE does not interfere with the edge of the CASSETTE LID.
1
. Switch off the ML300 and take off the PANELS.
2
. Place the BLOWPIPE ADJUSTMENT TOOL under the BLOW PIE as shown.
3
. If the BLOW PIPE is not in the correct position, loosen the SET SCREW , bring the
BLOW PIPE into the correct position and tighten the SET SCREW.
KODAK AG, Stuttgart
figure 3-12
figure 3-13
3-13
SM 3058-6
9/98