Replacement Of Film Pocket Torsion Spring (Sn > 2000) - Kodak X-Omat MULTILOADER 300 Plus Service Manual

REPLACEMENTS
REPLACEMENT OF FILM POCKET TORSION SPRING (SN > 2000).
Note
AFTER THE TORSION SPRING IS REPLACED, NO FILM POCKET ADJUSTMENTS is
required.
1
. Switch off the ML300.
2
. Take off the PANELS.
3
. Rotate out the FILM CHUTE.
4
. Loosen the SET SCREW of the COLLAR at the right-hand FILM REJECTER.
KODAK AG, Stuttgart
SET SCREW
figure 2-32
2-35
SM 3058-6
9/98