ADJUSTMENTS
Note
·
Do not forget to lock the NUTS
·
The END STOP SCREW will lift the CASSETTE SUCKER BAR away from the film when it
enters the ROLLERS.
4
.
If the distance between FILM and SUCKERS is not correct, turn the END STOP
SCREW in or out as required.
END STOP
SCREW
NUT
5
.
Disable the CONTINUOUS LOOP MODE.
Pull out the CASSETTE
Switch off the ML300. Wait 5 seconds and switch it on again.
6
.
Move SWITCH S1-1 on PCB A1 to OFF (down) for normal operation.
KODAK AG, Stuttgart
figure 3-22
3-21
SM 3058-6
9/98