Kodak X-Omat MULTILOADER 300 Plus Service Manual page 32

SM 3058-6
21.
Take off the SMALL GEAR.
SMALL GEAR
C-RING
22.
Mount the CHAIN onto the MOTOR DRIVE GEAR and onto the SMALL GEAR.
23.
Put the small GEAR onto its SHAFT and secure it with the C-RING.
24.
Tension the CHAIN by moving the CASSETTE OPENER MOTOR to the right.
25.
Tighten the MOTOR MOUNTING SCREWS.
26.
Move the CASSETTE OPENER to its fully up position.
Select UP until the OPENER BRACKET is vertical.
9/98
figure 2-21
2-20
REPLACEMENTS
KODAK AG, Stuttgart