Kodak X-Omat MULTILOADER 300 Plus Service Manual page 110

SM 3058-6
10.
Pull the INTERLOCK OVERRIDE.
11.
Connect the LAP TOP COMPUTER to the XML300 and start the SERVICE
SOFTWARE.
12.
Move the FILM POCKET to level 3.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ................................................................................ press ENTER
Select COMPONENT TEST from the MAIN MENU ....................................... press ENTER
Select MAGAZINE MOTORS ............................................................................ press ENTER
Select STEPPER MOTOR FILM POCKET M10 ................................................. press ENTER
Select MOVE TO LEVELS/HOME POSITION .................................................. press ENTER
Select MOVE TO MAGAZINE 3
13.
Rotate the FILM POCKET SUCKER BAR ARM to its vertical position, so that the
BALL BEARING is fully engaged in the DETENT.
Press BACKSPACE twice to come back to the screen TEST MAGAZINE MOTORS
Select FILM PICK UP MAGAZINE M15 ........................................................... press ENTER
Select FORWARD
9/98
The BALL BEARING must be fully engaged in the DETENT
figure 3-37
3-40
ADJUSTMENTS
KODAK AG, Stuttgart