Magazine Levels - Kodak X-Omat MULTILOADER 300 Plus Service Manual

SM 3058-6
1
. Change the PARAMETER LOWER POCKET ST.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ................................................................................ press ENTER
Select CHANGE ML300 DATA from the MAIN MENU ............................... press ENTER
Select CHANGE PARAMETER .......................................................................... press ENTER
Select LOWER POCKET ST................................................................................. press ENTER
Key in the new value....................................................................................... press ENTER
Select STORE PARAMETER ............................................................................... press ENTER
2
. Exit the SERVICE PROGRAM.
Press BACKSPACE twice
Select QUIT ML300 SERVICE MODE ............................................................... press ENTER
Select Quit the program ................................................................................. press ENTER

MAGAZINE LEVELS.

Purpose:
These values are used to transport the FILM POCKET to the correct level. One increment is
equal to 0.09 mm.
The VALUES in the table differ from ML300 to ML300. They depend on the position of the
LEVEL BRACKETS. This means if the ML300 works correct and if the values given by the
Lap Top are within the range, than everything seems to be correct. However if the position of
1 of the LEVEL BRACKETS was changed a SCAN RUN must be performed.
Note
After a SCAN RUN was performed do the nearly empty adjustment.
To change these values start the OPTION SCAN RUN of CHANGE PARAMETERS.
1
. Start the SCAN RUN.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ................................................................................ press ENTER
Select CHANGE ML300 DATA from the MAIN MENU ............................... press ENTER
9/98
EXAMPLE RANGE
MAG. LEVEL 1 1504 1400-1700
MAG. LEVEL 2 2597 2500-2800
MAG. LEVEL 3 3696 3600-3900
HOME POSITION
GEAR BACKLASH
2597
00006
4-8
PARAMETER
KODAK AG, Stuttgart