Adjustments; Introduction; Sensors And Daylight - Kodak X-Omat MULTILOADER 300 Plus Service Manual

ADJUSTMENTS

3. ADJUSTMENTS

INTRODUCTION

In this section it is very often explained how to use the CES SERVICE SOFTWARE. The first
line tells always what should be performed. In the next lines it is explained how to reach this
goal. These additional explanations are printed italic and can be skipped if you are
experienced with the CES SERVICE SOFTWARE.
EXAMPLE:
1
. Start the CASSETTE INPUT FLAP MOTOR M1
Start the SERVICE PROGRAM.
Select SERVICE MODE from the GLOBAL MENU ....................................... press ENTER
ENTER SERVICE MODE MESSAGE is displayed............................................ press ENTER
UNIT DATA are displayed ............................................................................... press ENTER
Select COMPONENT TEST from the MAIN MENU ....................................... press ENTER
Select CASSETTE MOTORS ............................................................................... press ENTER
Select INPUT FLAP MOT M1............................................................................. press ENTER
Select CLOSE/OPEN .......................................................................................... press ENTER

SENSORS and DAYLIGHT

The SENSORS are sensitive to daylight and to room light. This can result in wrong
measurements when you do an adjustment, or a SENSOR becomes triggered and the ML300
tries to bring the various units to HOME POSITION. For this reason dim the light or cover the
SENSORS when you do the adjustments. This is especially important when you measure the
output voltage of a SENSOR.
KODAK AG, Stuttgart 3-1
SM 3058-6
9/98