Replacement Of The Long Transport Roller - Kodak X-Omat MULTILOADER 300 Plus Service Manual

REPLACEMENTS

REPLACEMENT OF THE LONG TRANSPORT ROLLER.

1
. Switch off the ML300.
2
. Take off the PANELS.
3
. Remove the COVER PLATE of the HOLDING FINGER ASSEMBLY.
COVER PLATE
REAR
4
. Loosen the MOUNTING SCREWS of the CASSETTE TRANSPORT MOTOR to take
off the TIMING BELT tension.
REAR
SMALL DRIVE
PULLEY
TIMING BELT
5
. Take off the small DRIVE PULLEY with the TIMING BELT.
KODAK AG, Stuttgart
figure 2-6
MOUNTING SCREW
figure 2-7
2-7
SM 3058-6
FRONT
FRONT
CASSETTE
TRANSPORT MOTOR
MOUNTING
SCREWS
9/98